WalkoUSA

	WALKO-4 Professional The Walko-4 Professional Model Includes: 1 Walko-4 Frame 2 Left and 2 Right Handed Walko Table Supports 2 Walko Bamboo Table Tops 40.16 Inches (1070 mm) Wide Click Here for dimensions		WALKO-3 Professional The Walko-3 Professional Model Includes: 1 Walko-3 Frame 2 Left and 2 Right Handed Walko Table Supports 2 Walko Bamboo Table Tops 34.25 Inches (870 mm) Wide Click Here for dimensions
	WALKO-3 and 4 Professional Frames The frame can be positioned in several positions: in the standard, or tressled position (all four feet touching the ground) with two tops attached it is a large multi-purpose workbench. With one table mounted, tilt the Walko on it’s side to create a mid-level work, cutting, or assembly surface. Unfold the Walko and it lies on the ground for processing sheet goods, or lean it against the wall with the capability of attaching the table tops.		Table Supports Table supports allow you to affix the Bamboo tops to the Walko Frame. Four Bolts and you are ready put your Table tops on the Walko. Table supports have 3 positions. Engage the locks by pressing the lever all the way down and you are in a locked position. As you move the lever up, you will feel a detent in the mechanism, this allows you to angle the table so it becomes 90 degrees to the frame. By moving the lever all the way up, you disengage the locking mechanism, and you now can take the tables off the Walko frame or move it freely to the desired height.
	Bamboo Tabletops The Bamboo Tabletops are water-resistant (max. 24 hours), and provide 20mm “dog holes” for unlimited variations of clamping capabilities, plenty of free work space, and with the Walko Table Support, can be affixed to any part of the frame. The bolts that attach the Tabletops to the Table Supports are recessed 25mm to give plenty of room to set your Plunge Cut Saw to a comfortable depth.		Walko Cam Clamps The Cam Clamps are a handy item designed to be used with the holes on the Tabletops. The clamps are comprised of 1 cam levered side, and a stationary dogged stationary side. These clamps allow you clamp the most awkward work pieces.
	Work struts Work struts provide accessibility to work pieces that do not require the Table tops work surface. You can set the work strut at any desired height on the frame. Work struts are the ideal accessory to store work, or hang materiel.		Walko Caster Se Provide extra mobility to the Walko Frame. The casters are placed on the side of the Walko frame. When you need to transport the Walko, turn it on its side and roll it out of the trailer or around the shop.
	Wall mounts Wall mounts provide extra support for applications that require you to place the Walko frame upright against the wall or partition. Wall mounts are Ideal for both workshop and field applications; simply lift the frame out of the Wall Mounts to disengage.		Spacers Sets Spacer sets (included with your new Walko) are sacrificial and designed to allow for space between the saw blade and the Aluminum frame. The Spacers are impact proof, splinter proof, and unbreakable – even in freezing temperatures. Spacers do not slow the blade speed of your saw. Spacers can be easily replaced with pliers and mallet. On average, spacers are replaced approximately every two years, depending on usage.